← RETURN TO INDEX
OPEN FULL SIZE ↗Conceptual case section and detail zones, not the unrecovered S24 Ultra geometry.Explanatory drawing based on this record
RECORD LOCATED / 2026.09.01
S24 Ultra Engineering Unwarranted phone-case project
The phone-case project is a design and manufacturability study for a Galaxy S24 Ultra case. It keeps raised/recessed lettering, serial-plate styling, QR geometry, first-layer behavior, and physical scan validation as separate checks.
3DP-015REV A
AI narration using Robert's voice. S24 Ultra Engineering Unwarranted phone-case project / short introduction.
A CLOSER LOOK
Case fit, identity and scan area
OPEN FULL SIZE ↗- Target
- Galaxy S24 Ultra
- Material
- TPU 95A
- Checks
- Fit / lettering / scan
CLASSIFICATION3DP
STATUSRecovered/Partial
MATERIAL3D PRINT / MAKER
DISPOSITIONPUBLIC / RECOVERED/PARTIAL
TECHNICAL NOTES///
S24 Ultra case concept combining flexible material, embedded lettering, and a scan-tested code path.
PUBLIC KNOWLEDGE VIEW3D Printing / project
GOALCreate a durable case identity without sacrificing fit, readability, or printability.
EQUIPMENT
- Creator 5 Pro
- 0.4 mm nozzle
- Phone for fit and scan test
MATERIALS
- TPU 95A
- QR artwork
STEPS
- Confirm the case envelope and camera openings.
- Test lettering and code geometry in a small area.
- Print a first-layer sample before a full case.
- Check fit, flex, surface, and scan result.
- Record what changed for the next revision.
TROUBLESHOOTING
- A slicer preview is not proof that a finished part will fit or move.
- Change one process variable at a time so the next result is attributable.
- Keep material identity and nozzle size with every saved revision.
RESULTRecovered/partial project; physical fit and scan evidence are still tracked separately.
DEVELOPMENT HISTORY///
2026.09.01Rev A
Imported as an independent manifest record; public copy keeps uncertainty visible.
SPECIFICATION///
PrinterFDM printer / slicer
MaterialMaterial requires confirmation
FocusFit, flex, openings, and surface
ValidationSmall test print before release
RELEASED MATERIAL///
WHERE THIS STANDS
Recovered/partial project; physical fit and scan evidence are still tracked separately.
The record keeps what is known at this revision. Unfinished tests stay unfinished here.