← RETURN TO INDEX
OPEN FULL SIZE ↗A case-opening subject study with travel paths; not a recovered case shape or tested profile.Explanatory drawing based on this record
RECORD LOCATED / 2026.09.01
TPU phone-case stringing reduction
The recovered material identifies tpu phone-case stringing reduction as its own topic. This page preserves the useful direction, the next practical checks, and the limits of the surviving notes without inventing measurements or presenting an unverified idea as a finished standard.
3DP-013REV A
AI narration using Robert's voice. TPU phone-case stringing reduction / short introduction.
A CLOSER LOOK
Strings across case openings
OPEN FULL SIZE ↗- Material
- TPU / flexible filament
- Inspection
- Fit, flex, openings and surface
CLASSIFICATION3DP
STATUSRecovered/Partial
MATERIAL3D PRINT / MAKER
DISPOSITIONPUBLIC / RECOVERED/PARTIAL
TECHNICAL NOTES///
A public-safe 3d printing record for tpu phone-case stringing reduction, separated from the other experiments in the collection.
PUBLIC KNOWLEDGE VIEW3D Printing / project
GOALTurn tpu phone-case stringing reduction into a repeatable public note with a clear next test.
EQUIPMENT
- FDM printer / slicer
- Slicer project
- Calipers or inspection method
MATERIALS
- TPU / flexible filament
STEPS
- Confirm what the part must do and which printed feature matters most.
- Check geometry, clearances, orientation, and material before slicing.
- Print a small test or the least expensive revision first.
- Inspect the finished part after it has cooled completely.
- Record the next change with a photo or measurement.
TROUBLESHOOTING
- A slicer preview is not proof that a finished part will fit or move.
- Change one process variable at a time so the next result is attributable.
- Keep material identity and nozzle size with every saved revision.
RESULTPublic-safe starting record; validate against the next real test.
DEVELOPMENT HISTORY///
2026.09.01Rev A
Imported as an independent manifest record; public copy keeps uncertainty visible.
SPECIFICATION///
PrinterFDM printer / slicer
MaterialTPU / flexible filament
FocusFit, flex, openings, and surface
ValidationSmall test print before release
RELEASED MATERIAL///
WHERE THIS STANDS
Public-safe starting record; validate against the next real test.
The record keeps what is known at this revision. Unfinished tests stay unfinished here.