← RETURN TO INDEX
OPEN FULL SIZE ↗A conceptual section for inspecting the TPU/PLA cube test; no bond strength or dimensions are claimed.Explanatory drawing based on this record
RECORD LOCATED / 2026.09.01
Creator 5 Pro mixed TPU-and-PLA cube test
This test keeps the TPU/PLA combination as its own record. It is useful for documenting tool assignment, adhesion, transition quality, purge behavior, and whether the finished cube separates or distorts.
3DP-007REV A
AI narration using Robert's voice. Creator 5 Pro mixed TPU-and-PLA cube test / short introduction.
A CLOSER LOOK
The flexible–rigid boundary
OPEN FULL SIZE ↗- Materials
- TPU and PLA
- Tower
- Enabled
- Measurements
- Awaiting retest
CLASSIFICATION3DP
STATUSRecovered/Partial
MATERIAL3D PRINT / MAKER
DISPOSITIONPUBLIC / RECOVERED/PARTIAL
TECHNICAL NOTES///
Mixed-material cube test used to observe transitions between flexible and rigid filament.
PUBLIC KNOWLEDGE VIEW3D Printing / project
GOALCharacterize a mixed TPU-and-PLA process before applying it to a larger object.
EQUIPMENT
- Creator 5 Pro
- 0.4 mm nozzle
- Prime tower
MATERIALS
- TPU 95A
- PLA
STEPS
- Dry and label both materials.
- Assign each slot and keep the tower enabled.
- Print the small test cube.
- Inspect bond, stringing, purge, and dimensional result.
TROUBLESHOOTING
- If the tower is unstable, stop and verify material assignment and purge behavior.
- If the bond is weak, treat the combination as experimental.
RESULTRecovered/partial test record; detailed measurements remain a future retest.
DEVELOPMENT HISTORY///
2026.09.01Rev A
Imported as an independent manifest record; public copy keeps uncertainty visible.
SPECIFICATION///
PrinterCreator 5 Pro
MaterialTPU / flexible filament
FocusFirst layer, dimensions, surface, and function
ValidationSmall test print before release
RELEASED MATERIAL///
WHERE THIS STANDS
Recovered/partial test record; detailed measurements remain a future retest.
The record keeps what is known at this revision. Unfinished tests stay unfinished here.