U225X PUBLIC RECORD / 3DP-007
TITLE: Creator 5 Pro mixed TPU-and-PLA cube test
STATUS: Recovered/Partial
CATEGORY: 3D Printing
TYPE: project

This test keeps the TPU/PLA combination as its own record. It is useful for documenting tool assignment, adhesion, transition quality, purge behavior, and whether the finished cube separates or distorts.

GOAL: Characterize a mixed TPU-and-PLA process before applying it to a larger object.

EQUIPMENT
- Creator 5 Pro
- 0.4 mm nozzle
- Prime tower


MATERIALS
- TPU 95A
- PLA



STEPS
- Dry and label both materials.
- Assign each slot and keep the tower enabled.
- Print the small test cube.
- Inspect bond, stringing, purge, and dimensional result.


TROUBLESHOOTING
- If the tower is unstable, stop and verify material assignment and purge behavior.
- If the bond is weak, treat the combination as experimental.



RESULT
Recovered/partial test record; detailed measurements remain a future retest.

SOURCE NOTE
This is a public-safe summary assembled from the local content manifest and recovered notes. It is not a raw conversation transcript. Measurements, files, and outcomes remain marked as provisional where the source did not preserve enough evidence.

PROPERTY OF U225X / PUBLIC-SAFE IMPORT