← RETURN TO INDEX
OPEN FULL SIZE ↗The recovered material assignment and tower relationship, shown schematically.Explanatory drawing based on this record
RECORD LOCATED / 2026.09.01
Creator 5 Pro four-color prime-tower workflow
The four-color workflow keeps the prime tower enabled and separates TPU 95A in slot 1 from PLA in slots 2–4. The tower is treated as process control, not decoration; disabling it is a separate failure record.
3DP-005REV A
AI narration using Robert's voice. Creator 5 Pro four-color prime-tower workflow / short introduction.
A CLOSER LOOK
Four slots and a separate prime tower
OPEN FULL SIZE ↗- Slot 1
- TPU 95A
- Slots 2–4
- PLA
- Prime tower
- Enabled
- Nozzle
- 0.4 mm
CLASSIFICATION3DP
STATUSProven
MATERIAL3D PRINT / MAKER
DISPOSITIONPUBLIC / PROVEN
TECHNICAL NOTES///
Recovered multi-color workflow centered on a required prime tower.
PUBLIC KNOWLEDGE VIEW3D Printing / project
GOALKeep tool changes stable enough for a repeatable four-color print.
EQUIPMENT
- Creator 5 Pro
- 0.4 mm nozzle
- Prime tower
MATERIALS
- TPU 95A
- PLA
STEPS
- Assign materials deliberately.
- Enable and inspect the prime tower.
- Run a small test before a long decorative print.
- Record purge, tower, and surface results.
TROUBLESHOOTING
- A slicer preview is not proof that a finished part will fit or move.
- Change one process variable at a time so the next result is attributable.
- Keep material identity and nozzle size with every saved revision.
SAFETY / LIMITS
- Do not assume one material profile transfers to another printer or nozzle.
RESULTWorkflow proven in the recovered setup.
DEVELOPMENT HISTORY///
2026.09.01Rev A
Imported as an independent manifest record; public copy keeps uncertainty visible.
SPECIFICATION///
Nozzle0.4 mm
SlotsTPU 95A / PLA
Prime towerEnabled
ValidationRecovered workflow
RELEASED MATERIAL///
WHERE THIS STANDS
Workflow proven in the recovered setup.
The record keeps what is known at this revision. Unfinished tests stay unfinished here.