U225X PUBLIC RECORD / 3DP-005
TITLE: Creator 5 Pro four-color prime-tower workflow
STATUS: Proven
CATEGORY: 3D Printing
TYPE: project

The four-color workflow keeps the prime tower enabled and separates TPU 95A in slot 1 from PLA in slots 2–4. The tower is treated as process control, not decoration; disabling it is a separate failure record.

GOAL: Keep tool changes stable enough for a repeatable four-color print.

EQUIPMENT
- Creator 5 Pro
- 0.4 mm nozzle
- Prime tower


MATERIALS
- TPU 95A
- PLA



STEPS
- Assign materials deliberately.
- Enable and inspect the prime tower.
- Run a small test before a long decorative print.
- Record purge, tower, and surface results.


TROUBLESHOOTING
- A slicer preview is not proof that a finished part will fit or move.
- Change one process variable at a time so the next result is attributable.
- Keep material identity and nozzle size with every saved revision.


SAFETY / LIMITS
- Do not assume one material profile transfers to another printer or nozzle.


RESULT
Workflow proven in the recovered setup.

SOURCE NOTE
This is a public-safe summary assembled from the local content manifest and recovered notes. It is not a raw conversation transcript. Measurements, files, and outcomes remain marked as provisional where the source did not preserve enough evidence.

PROPERTY OF U225X / PUBLIC-SAFE IMPORT