Twix Buffer Roller Drawing
A conversation-specific public summary of twix buffer roller drawing, distilled from the supplied export. The detailed excerpts remain available in the released note file.
A slight crown along the roller
OPEN FULL SIZE ↗- Length
- 59.625 in
- Crown diameter
- 2.760 in
- End diameter
- 2.670 in
- Bearing note
- 6206RS identification unverified
TECHNICAL NOTES///
Conversation-specific knowledge extracted from the twix buffer roller drawing discussion.
QUESTION / CONTEXTI have a roller I am reverse engineering that is called a twix buffer conveyor roller the outter most tube diameter is 2.76 at the crown it tappers down to 2.67 and the end, it is 59.625" oal it has a shoulder for the bearing to set can you make me a pdf drawing of it
IMPORTANT GUIDANCE
- *[📄 Twix_Buffer_Conveyor_Roller_Preliminary_Reverse_Engineering_Drawing.pdf](sandbox:/mnt/data/Twix_Buffer_Conveyor_Roller_Preliminary_Reverse_Engineering_Drawing.pdf)
- Overall Length: 59.625 in
- Crown Diameter: Ø2.760 in
- End Diameter: Ø2.670 in
- Noted that the tube is crowned/tapered
- Bearing identified from the photos as 6206RS
- Shoulder for the bearing
- Square shaft with threaded retaining hole
Extracted from the conversation’s assistant responses and edited for public clarity. See the released note for additional redacted excerpts.
DEVELOPMENT HISTORY///
Matched to the supplied export; key guidance is surfaced separately and the raw transcript remains unpublished.
SPECIFICATION///
RELEASED MATERIAL///
RECOVERED / SPECIFIC NOTE
The record keeps what is known at this revision. Unfinished tests stay unfinished here.