← RETURN TO RECORDDOWNLOAD PDF ↓

U225X / ENGINEERING UNWARRANTED

SolidWorks Auger Macro

Public record / CHAT-0320 / Revision EXPORT-03

PUBLIC RECORD
U225X

A conversation-specific public summary of solidworks auger macro, distilled from the supplied export. The detailed excerpts remain available in the released note file.

STATUSRECOVERED / SPECIFIC NOTECLASSIFICATIONSYSMATERIALCHAT EXPORT / BUILD & TOOLSDATE2026.04.21

TECHNICAL NOTES

Conversation-specific knowledge extracted from the solidworks auger macro discussion.

EXTRACTED KNOWLEDGE / HOW-TO FROM CONVERSATION

QUESTION / CONTEXT: I NEED A MACRO FOR SOLIDWORKS 2025 THAT CREATES AN AUGER TYPE SHAPE STARTING AT "AUGSTART" PLANE AND ENDS AT "AUGEND" PLANE THE SPECS OF THE AUGER ARE THIS .39 ID .80 OD 16 REVOLUTIONS AND IT IS MADE OUT OF 7 GA STAINLESS PLATE ALSO IF NEEDED I CREATED "POINT2" AT THE START OF THE AUGER AND "POINT1" AT THE END OF THE AUGER THAT CAN BE USED AS CENTER POINTS

  1. POINT2 = auger start center
  2. POINT1 = auger end center
  3. AUGSTART and AUGEND already exist
  4. 7 ga stainless = 0.1875 in thickness
  5. ID = 0.39 in
  6. OD = 0.80 in
  7. 16 revolutions
  8. a 3D path from POINT2 to POINT1

SPECIFICATION

SourceSupplied ChatGPT export
CategoryBuild & Tools
Conversation2 user turns / 5 assistant turns
Attachments24 references detected
Public detailExtracted knowledge + excerpts

DEVELOPMENT HISTORY

2026.04.21EXPORT-04Matched to the supplied export; key guidance is surfaced separately and the raw transcript remains unpublished.