← RETURN TO RECORDDOWNLOAD PDF ↓

U225X / ENGINEERING UNWARRANTED

3D-printed koozie fixture

Public record / CHAT-0055 / Revision EXPORT-03

PUBLIC RECORD
U225X

A conversation-specific public summary of 3d-printed koozie fixture, distilled from the supplied export. The detailed excerpts remain available in the released note file.

STATUSRECOVERED / SPECIFIC NOTECLASSIFICATIONSYSMATERIALCHAT EXPORT / BUILD & TOOLSDATE2026.07.14

TECHNICAL NOTES

Conversation-specific knowledge extracted from the 3d-printed koozie fixture discussion.

EXTRACTED KNOWLEDGE / HOW-TO FROM CONVERSATION

QUESTION / CONTEXT: What is this

  1. The flat base is where the leather koozie lays.
  2. The raised lip/ledge along one side keeps the bottom edge of the koozie aligned.
  3. The adjustable bar with three screws in slots lets you tighten or loosen the clamp for slightly different koozie sizes.
  4. The threaded metal table in the background looks like a laser engraver or marking machine bed, so this jig is likely used to hold the koozie perfectly still while it's engraved.
  5. 5 inches tall
  6. 3 inches wide
  7. About ½–¾ inch thick overall.
  8. Use captured hex nuts instead of threading into plastic.

SPECIFICATION

SourceSupplied ChatGPT export
CategoryBuild & Tools
Conversation1 user turns / 1 assistant turns
Attachments10 references detected
Public detailExtracted knowledge + excerpts

DEVELOPMENT HISTORY

2026.07.14EXPORT-04Matched to the supplied export; key guidance is surfaced separately and the raw transcript remains unpublished.