U225X / ENGINEERING UNWARRANTED
Adventurer 5M PLA retractable-wand profile
Public record / 3DP-001 / Revision A
PUBLIC RECORD
U225X
U225X
The current standard uses 0.24 mm layers, three walls, four top and bottom layers, 15% grid infill, 220°C first-layer / 215°C later nozzle temperature, 60°C first-layer / 55°C later bed temperature, controlled cooling, and a deliberately fast but bounded motion profile. It is a starting point for this printer, material, and nozzle combination—not a universal profile.
TECHNICAL NOTES
Canonical fast-PLA starting profile for the retractable wand on a 0.4 mm nozzle.
SPECIFICATION
Layer0.24 mm
Shell3 walls / 4 top / 4 bottom
Infill15% Grid at 45°
Temperature220°C first / 215°C later
Bed60°C first / 55°C later
Speed40 first / 120 outer / 180 inner / 220 infill
DEVELOPMENT HISTORY
2026.09.01Rev AImported as an independent manifest record; public copy keeps uncertainty visible.