← RETURN TO RECORDDOWNLOAD PDF ↓

U225X / ENGINEERING UNWARRANTED

SolidWorks Weight Calculation Issue

Public record / CHAT-0357 / Revision EXPORT-03

PUBLIC RECORD
U225X

A conversation-specific public summary of solidworks weight calculation issue, distilled from the supplied export. The detailed excerpts remain available in the released note file.

STATUSRECOVERED / SPECIFIC NOTECLASSIFICATIONSYSMATERIALCHAT EXPORT / BUILD & TOOLSDATE2026.06.26

TECHNICAL NOTES

Conversation-specific knowledge extracted from the solidworks weight calculation issue discussion.

EXTRACTED KNOWLEDGE / HOW-TO FROM CONVERSATION

QUESTION / CONTEXT: why is solid works calculating this frame to only weigh 30 pounds it is made of 3 x 3 x 3/16 stainless square tube

  1. Right-click the part/weldment body.
  2. Go to Material.
  3. Make sure it is actually set to 304 Stainless.
  4. Then right-click the Cut List and choose Update.
  5. Open Mass Properties again and hit Recalculate.
  6. Frame CG ≈ centered over base (9.75" from front legs)
  7. Chute assembly CG ≈ 18–24" in front of the front legs
  8. 150 lb of product in the hopper

SPECIFICATION

SourceSupplied ChatGPT export
CategoryBuild & Tools
Conversation5 user turns / 6 assistant turns
Attachments31 references detected
Public detailExtracted knowledge + excerpts

DEVELOPMENT HISTORY

2026.06.26EXPORT-04Matched to the supplied export; key guidance is surfaced separately and the raw transcript remains unpublished.