← RETURN TO RECORDDOWNLOAD PDF ↓

U225X / ENGINEERING UNWARRANTED

SolidWorks Macro Plate

Public record / CHAT-0341 / Revision EXPORT-03

PUBLIC RECORD
U225X

A conversation-specific public summary of solidworks macro plate, distilled from the supplied export. The detailed excerpts remain available in the released note file.

STATUSRECOVERED / SPECIFIC NOTECLASSIFICATIONSYSMATERIALCHAT EXPORT / BUILD & TOOLSDATE2026.04.14

TECHNICAL NOTES

Conversation-specific knowledge extracted from the solidworks macro plate discussion.

EXTRACTED KNOWLEDGE / HOW-TO FROM CONVERSATION

QUESTION / CONTEXT: write me a macro to draw a plate that is 3" wide by 12.5" long it needs a hole pattern in the center that is 1.5 off the left edge, the next hole is 4.5 off the left edge the next hole is 8 off the left edge final hole is 11 off the edge

  1. create a 12.5" x 3" plate
  2. place 4 holes on the centerline
  3. hole centers at:
  4. 1.5"
  5. 4.5"
  6. 8.0"
  7. 11.0"
  8. use a default hole diameter of 0.5"

SPECIFICATION

SourceSupplied ChatGPT export
CategoryBuild & Tools
Conversation4 user turns / 7 assistant turns
Attachments27 references detected
Public detailExtracted knowledge + excerpts

DEVELOPMENT HISTORY

2026.04.14EXPORT-04Matched to the supplied export; key guidance is surfaced separately and the raw transcript remains unpublished.