FreeCAD Anchor Plate Macro
A conversation-specific public summary of freecad anchor plate macro, distilled from the supplied export. The detailed excerpts remain available in the released note file.
The five inputs to an anchor plate
OPEN FULL SIZE ↗- Inputs
- Length, width, thickness, hole diameter, edge spacing
- Macro name example
- AnchorPlateMaker
TECHNICAL NOTES///
Conversation-specific knowledge extracted from the freecad anchor plate macro discussion.
QUESTION / CONTEXTwrite me a macro for FreeCAD 1.0.2 that creates a plate like an anchor plate but I want a dialog box that prompts me to put in the length, width, thickness, hole size, and edge spacing. typically I want the part to have 4 holes near each corner spaced whatever I have as the edge distance
IMPORTANT GUIDANCE
- length
- width
- thickness
- hole diameter
- edge spacing
- Open Macro → Macros
- Click Create
- Name it something like `AnchorPlateMaker`
Extracted from the conversation’s assistant responses and edited for public clarity. See the released note for additional redacted excerpts.
DEVELOPMENT HISTORY///
Matched to the supplied export; key guidance is surfaced separately and the raw transcript remains unpublished.
SPECIFICATION///
RELEASED MATERIAL///
RECOVERED / SPECIFIC NOTE
The record keeps what is known at this revision. Unfinished tests stay unfinished here.