U225X PUBLIC RECORD / 3DP-012
TITLE: TPU 95A drying and stringing diagnosis
STATUS: Needs Retest
CATEGORY: 3D Printing
TYPE: project

The record separates material conditioning from speed, travel, and retraction changes. Dry the material first, then change one variable at a time so a stringing improvement can be attributed to a real cause.

GOAL: Reduce TPU stringing without hiding the effect of moisture or excessive travel.

EQUIPMENT
- Creator 5 Pro
- Drying setup
- Calibration model


MATERIALS
- TPU 95A



STEPS
- Verify dryness and record how it was achieved.
- Run a controlled temperature/speed test.
- Reduce open-air travel where practical.
- Tune retraction only after the earlier checks.
- Save the successful project with the material identity.


TROUBLESHOOTING
- Wet filament can imitate a retraction problem.
- Changing several variables at once makes the result difficult to trust.


SAFETY / LIMITS
- Follow the filament maker's drying limits and keep the material away from contamination.


RESULT
Needs retest; no universal TPU values are claimed.

SOURCE NOTE
This is a public-safe summary assembled from the local content manifest and recovered notes. It is not a raw conversation transcript. Measurements, files, and outcomes remain marked as provisional where the source did not preserve enough evidence.

PROPERTY OF U225X / PUBLIC-SAFE IMPORT