LOGO GEAR / MOVING-PART PRINT NOTES
Record: DAT-0027 / Revision A
Status: Observed workflow; next profile needs testing

GOAL
Make a strong printed gear or logo mechanism that still moves freely.

OBSERVED RESULTS
Printed on the Creator 5 Pro. Top-surface quality and small logo lettering needed improvement.
The gears were slightly loose and minor first-layer stringing appeared.

NEXT REVISION FIELDS
XY or hole compensation, elephant-foot compensation, wall count, top layers, infill, seam,
ironing or top-surface pattern, first-layer temperature and speed, per-part clearance,
finished clearance, print time, and result rating.

No exact values are guessed in this record.