ADVENTURER 5M / GENERIC PLA RECOVERED PROFILE
Record: DAT-0022 / Revision A
Status: Recovered partial profile

RECOVERED VALUES
Printer: FlashForge Adventurer 5M
Nozzle: 0.4 mm
Material profile: Generic PLA
Profile name: 0.24mm Draft @Flashforge AD5M 0.4 Nozzle
Layer height: 0.24 mm
Default line width: 0.42 mm
Outer-wall line width: 0.42 mm
Inner-wall line width: 0.45 mm
Sparse infill: Grid
Infill direction: 45-degree pattern visible

NOT RECORDED
Infill overlap, temperatures, speeds, accelerations, retraction, Z-hop, cooling, flow ratio,
walls, top/bottom layers, seam, adhesion, and support values. Missing values are intentionally
not filled with defaults. The associated project was a retractable-wand-like fast prototype;
final success was not claimed.

RELATED STARTING PROFILE
The separate 3DP-001 record contains a proposed starting profile. Those values
are not recovered settings from this DAT-0022 record.
https://u225x.com/record/3DP-001